The Linksys Velop (WHW03) router has Gigabit WiFi, 1 Gigabit ETH-ports and 0 USB-ports. It has a total combined WiFi throughput of 2200 Mpbs. It is also known as the Linksys Tri-Band Whole Home Wi-Fi Mesh Node.
Linksys Velop (WHW03) default Password , Login & Gateway settings :
If you have performed a reset of your Velop (WHW03) device or not changed the defaults, you should be able to access it with the following settings :
- Default subnet mask: 255.255.255.0
- Default Network name (SSID): VelopSetupXXX
How to factory reset (hard reset) Linksys Velop (WHW03) :
You can factory reset your Linksys Velop (WHW03) in the following 2 way(s) :
1 . Through the web interface
- Open a browser and navigate to the web interface of the router (see default settings above)
- In the menu look for System tools and under there find the Factory defaults option
- On the Factory defaults page click on the Restore button to perform the reset.
2. Use the RESET/WPS button :
- Have the unit powered on
- Press and hold the reset (sometimes reset/WPS) button for 10 seconds with a paperclip or other sharp object.
- When the SYS led start blinking quickly release the reset button and wait for router to boot back up.
Linksys Velop (WHW03) router specifications :
System specs
- CPU: 716 MHz
- RAM: 512 MiB
- Flash: 4096 MiB
- Custom firmwares: None
Connectivity
- WiFi: Gigabit (abgn+ac)
- WiFi bands
- 2.4GHz & 5GHz
- WiFi throughput: 2200 Mpbs
- WAN 1 x Gigabit port
- ETH 1 x Gigabit port
- USB-ports: 0
- Velop (WHW03) Firmwares